GLASTECH™ TOPCOATS


GlasTech Lo 8000 topcoat system is a high-solids, 2 component roll applied topcoat for use on a variety of surfaces. With its low VOC content (< 100 grams/liter), low odor, fast return-to-service time and exceptional impact and abrasion resistance, it is an excellent choice for indoor and commercial applications where units must be returned to full service the same day. GlasTech Lo 8000 Topcoats are available in gloss and semi-gloss clear finishes.
GlasTech Lo 8500 topcoat system is a high-solids, three component spray topcoat for use on a variety of surfaces. With its low VOC content (< 100 grams/liter), low odor, fast return-to-service time and exceptional impact and abrasion resistance, it is an excellent choice for indoor and commercial applications where units must be returned to full service the same day. GlasTech Lo 8500 Topcoats are available in gloss and semi-gloss clear finishes.

GlasTech 9000 topcoat system is a two component, high solids, high performance acrylic urethane system. This fully cross-linked aliphatic urethane is extremely durable and is the most proven, long-term refinishing topcoat available in the world today. As GlasTech 9000 topcoat is applied, a clear, resin-rich layer forms on top of the film. The 'deep, rich gloss' is a barrier layer that provides what other coatings lack: long-term protection against harsh impacts, chemicals and moisture. The GlasTech 9000 resin system is available in pure white, standard white, and all standard plumbing fixture and appliance manufacturer colors, including clear. 
GlasTech Lo 9000 topcoat system is a low VOC, low odor, 2:1 acrylic urethane topcoat system. It is a two-component, high solids topcoat system used for the porcelain and appliance refinishing industry. It possesses excellent wear and stain resistance and is very resistant to runs and sags during application. It has all the benefits of the traditional GlasTech 9000 Series topcoat system and provides a low odor solution that is compliant with all current VOC regulations for topcoats. Product compatibility over a wide range of primer systems, combined with superior U.V. resistance, makes GlasTech Lo 9000 ideal for many different types of applications.

GlasTech 9100 topcoat system offers the same dry film performance as our GlasTech 9000 topcoat system, yet offers a return-to-service time of 24 hours. Faster return-to-service is ideal for smaller homes with limited bath facilities or hotel and motel venues.
  • Dries to caulk in only one hour
  • Return to service the very next day
GlasTech Lo 9100 topcoat system is a low VOC, low odor, 24-hour cure, 2:1 acrylic urethane topcoat system.  It possesses all the benefits of the traditional GlasTech 9100 Series Topcoat System and provides a low odor solution that is compliant with all current VOC regulations for topcoats. This is made possible by a technology, which eliminates many of the negative side effects of older liquid accelerators, such as low cross-linking, softer dry films, pigmentation kick-out, and blushing. GlasTech Lo 9100 topcoat system is ideal for commercial applications where VOC regulations require topcoat systems to be less than 350 g/L, low odor and be returned to full service the next day.
GlasTech 9200 topcoat system offers the same dry film performance characteristics as GlasTech 9000 and GlasTech 9100 topcoats, yet has a return-to-service time of only 4 hours. This topcoat system utilizes a revolutionary technology that enables a fast cure, without the brittleness or softness that can sometimes occur with other lower quality technologies. Mix 2:1 with GlasTech 9000 Catalyst and reduce as necessary with GlasTech 9000 Fast, Medium or Slow Reducer.

Note: 4 hour return-to-service time is under the following conditions: 4 hours at 75°F, 50% relative humidity with sufficient ventilation and air flow. However, resistance to heavy detergents, household cleaners and solvents will require several days of curing.
  • 4-hour cure resin
  • Faster dry to tack and touch
  • Masking removal in 15 minutes
GlasTech Lo 9200 topcoat system is a low VOC, low odor, 4-hour cure, 2:1 acrylic urethane topcoat system.  It possesses all the benefits of the traditional GlasTech 9200 Topcoat System and provides a low odor solution that is compliant with all current VOC regulations for topcoats. This is made possible by a technology, which eliminates many of the negative side effects of older liquid accelerators, such as low cross-linking, softer dry films, pigmentation kick-out, and blushing.  GlasTech Lo 9200 Topcoat System is ideal for commercial applications where VOC regulations require topcoat systems to be less than 350 g/L, low odor and be returned to full service the next day.
All topcoat systems are available with Sterlion™ antimicrobial with SilTrac™ technology that will inhibit the growth of bacteria on the surface and protect the surface from product damaging bacteria.
Loading
Loading